Back to top
  • KONTAKT CENTAR: +381 32 40 40 40
  • Radnim danima od 08 – 18h
  • Subotom od 09 – 16h

Bathroom Water Heaters

AURORA

Water heaters with dry heating element for harder and aggressive water, against lime scale MB models (80/120 litres ) – water heater diameter 454 mm and EZV models (50) with a diameter of 395mm, with an enameled or stainless steel tank

 

CERAMIC

Water heaters with ceramic dry heating element for harder and aggressive water, against lime scale MB models (80/120) with a boiler diameter of 454mm and EZV models (50) with a diameter of 395mm, with an enamel or stainless steel tank

 

DIGITAL

Bathroom water heaters with electronic control, MB models (80/120) with a boiler diameter of 454mm and EZV models (50) with a diameter of 395mm, with an enamel or stainless steel tank

 

HYDRA

Bathroom water heaters with external control, MB models (50/80/120/150), EZV and MS models (50/80) and horizontal model (80), with enamel or stainless steel tanks

 

 

ORION

Bathroom water heaters with internal temperature control, MB model (80l) and EZV model (50), with enamel tank

 

SIRIUS

Water heaters with electronic and Wi Fi control, MB models (80/120) with a boiler diameter of 454mm and EZV models (50) with a diameter of 395mm, with an enamel or stainless steel cauldron

 

WATER HEATERS WITH ENAMELED TANK

  • Electrostatic enameling gives uniform enamel layer being a key factor for a long term appliance service.
  • Universal Ø 72 mm flange on all models with enameled tank enables installation of both dry and ceramic heating elements.
  • Double safety bipolar thermostat

WATER HEATERS WITH STAINLESS STEEL TANK

  • Made of high-quality stainless steel that gives maximum protection against corrosion and longer lifetime of the appliance
  • Elliptical flage opening (90 x 75 mm) enables quick and easy tank cleaning
  • With stainless steel tank water heaters temperature is regulated with two separate thermostats (operating and safety)
  • Polyurethane eco-friendly insulation ensures minimum heat loss and longer keeps hot water in the tank compared to classic mineral wool insulation (energy efficiency)
  • Universal holder – wall fitting range from 130 to 360 mm that suits most of water heater models available in the market
  • Stainless steel outlet pipe for hot water (the tip of the pipe does not wear out during service life of the water heater, therefore no change in quantity of hot water over time)
  • Magnesium anode provides long-term protection of the tank and other metallic parts against corrosion and extends the life of the water heater
  • Safety valve must be used at installation
  • All our water heaters are delivered with the 8 bar safety valve

UNIVERSAL HOLDER

Thanks to its wide fitting range (130 – 360 mm) of the universal holder, most of water heater models on the market can be fitted to the wall easily. Installation is easy also in case water heater is replaced, without drilling new holes in the wall.
With this universal holder Metalac water heaters can be mounted also to a metal plate if previous water heater of any other manufacturer was fixed to the wall by means of such metal plate.

ENERGY LABEL

Energy efficiency label provides information on water heater type, its energy efficiency class and annual electricity consumption. Metalac water heaters meet all the requirements and directives regarding energy efficiency and they are highly rated. Medium capacity heaters are rated c, while small capacity heaters are rated A and B energy class.

KEY COMPONENTS AND FEATURES

1

QUALITY TANK

Metalac water heater tanks have an enamel coating, which protects the boiler from corrosion and ensures high level of water hygiene. The electrostatic and wet enamel application process gives uniform enamel layer prescribed by the standards.
Metalac water heaters are also available with high-quality stainless steel tank which provides maximum protection against corrosion and ensures longer service life of the appliance.

2

WIFI CONTROL OF THE BOILER

The electronic smart regulation enables remote control of the water heater from a smartphone

3

Mg ANODE

A magnesium anode is installed in each medium capacity water heater, which provides long-term protection against corrosion and extends the life of the boiler. The magnesium anode is located in the lower part of the boiler so it is easy to replace.

4

STAINLESS STEEL PIPE FOR HOT WATER

Stainless steel outlet pipe for hot water (the tip of the pipe does not wear out during service life of the water heater, therefore no change in quantity of hot water over time)

5

TEMPERATURE REGULATION

Metalac medium capacity water heaters are available in two versions - with internal and external temperature regulation. Heaters with internal regulation are set to heat water up to 55-60 °C, which is the optimal temperature from energy saving aspect and scale formation.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.