Aurora and Ceramic

• Longer life of the heater
• Heating element not in contact with water – higher safety
• Replacing the heater without emptying the water heater
• Especially good for hard water – less lime scale deposits
• Heating element quick and simple to replace, no need to drain water from water heater
• Lower electricity consumption
• Polyurethane ECO insulation
• Univeral loder – wide fitting range (130 – 360 mm)

Water heaters with dry heating element for harder and aggressive water, against lime scale MB models (50/80/100/120) – water heater diameter 454 mm, with enamel or stainless steel tank.

• Dry heating element – two 1000 W separate heating elements, 2000 W in total
• Higher safety with 2 separate thermostats
• In case one heating element fails water heater can operate with second heating element
• Stainless steel outlet pipe

Water heaters with ceramic dry heating element for harder and aggressive water, against lime scale MB models (50/80/100/120) – water heater diameter 454 mm, with enamel or stainless steel tank.

• Ceramic dry heating element – 1500 W and 2100 W depending on boiler size
• Lower power consumption, bigger surface of the heating element – better heat exchange